Category: Microsoft Windows

How to Fix Network Discovery is Turned off in Windows 11

In this guide, we will show you How to fix network discovery is turned off in Windows 11. A lot of Windows users have been requesting that when users try to enable the “network discovery feature in windows” it always shows an error “network discovery is turned off. “Network computers and devices are not visible”. “Please turn on Network Discovery in Network and sharing center”.

So after reading this guide, you will be eligible to turn On/Off Network Discovery on your Windows 11 computer.

What is Network Discovery in Windows 11?

The Network discovery permits your system to discover, and find other devices and computers on your network. So what happens when the network discovery option is on. You can easily share network resources with the computers you want. However, network discovery makes it easier for the attacker to find these resources.

Network discovery is turned off error

Table of Contents

Reconfigure your advanced sharing setting

Enable these windows services

Allow network discovery in firewall settings

Do a Network reset

Run Network troubleshooter

Update Network Adapter

Disable antivirus and firewall

To fix the above error follow the below steps, if one does not work for you, then please try the next one.

Reconfigure your advanced sharing setting

Open run command, type Control Panel and then hit ok.

Click on Network and Sharing Center.

On your left side, click on Change advanced sharing settings to fix the Network discovery is off error on Windows 11.

Under the private section
Turn on network discovery
Enable Turn on automatic setup of network connected devices.
Under the File and printer sharing section

Enable Turn on file and printer sharing.

Under the Guest or Public
Turn on network discovery
Turn on file and printer sharing

Under the All networks section

Turn on sharing options so everyone with network access can read and write files under the Public folders “Enable file sharing for devices” that use 40-bit or 56-bit encryption
Turn off Password Protected Sharing (if you trust all the devices in your network) and click save settings.

Restart your computer and then check the error Network Discovery is turned off is still showing or not.

Enable these windows services

If you are still continuing to see Network discovery is turned off error, then please make sure these services are running.

Press the Windows keyboard button Win + R to launch the Run window. Enter services.msc and then hit enter.

Function Discovery Resource Publication

Launch “Function Discovery Resource Publication” service, choose Automatic. Click start and then click ok.

DNS Client

Open DNS Client service and then make sure it is set to Automatic and make sure the service is running.

SSDP Discovery

Set to Automatic and make sure the service is running.

UPnP Device Host.

Make sure it is set to Automatic and make sure the service is running, if not click the start button and then click ok.

Network Connections

Check is it Automatic and makes sure the service is running.

Network Location Awareness

Set to Automatic and make sure the service is running.

After enabling these services, you must be able to fix the network discovery error.

Allow network discovery in firewall settings

Click on the Windows search bar type Windows Firewall and then open the Windows Defender Firewall.

On your left side, click on Allow an app or feature through Windows Defender Firewall.

Make sure the network discovery feature is turned on (Private and Public) checkboxes.

Do a Network Reset

Try resetting the network settings if the above fix didn’t help you.

Open Windows Settings and then click on Network & Internet.

Click Advanced network settings.

Scroll down select network reset and then click reset now.

After this restart your computer.

How to Run Troubleshoot on Windows 11

Open Settings, click on System, and then click the Troubleshoot.

Click the Other troubleshooters.

Run Network troubleshooter

Also read this article: How to Enable Network Discovery.

For more details, visit Microsoft

27/07/2023
How to Join Windows to Domain Controller 2022

In this guide, I will explain how to join Windows to domain controller 2022. To add a computer, in this case, Windows 10 or 11, to a domain in Windows Server 2022 we require the following. Windows 10 or 11 Professional or Enterprise, this since Windows 11 Home does not allow adding the computer to the domain.

Requirements for Domain

Required an account that is a member of the domain
First, we need to check that the Windows IP configuration is correct.

Join Windows to Domain Controller

Open network properties, typing “ncpa.cpl” in the run command.
Apply the changes and then exit the configuration.

Right-click on this pic on the Windows 11 desktop and then select properties.

Under system > About, click on Domain or workgroup.

Windows 11 system properties, select the Change button to job Windows to Active directory.

Select the Domain box and then enter the domain name, click ok.

Now enter the domain administrator credentials and then click ok.

Select the ok button and after a moment the computer will join the domain controller.

Click ok to restart the computer.

Click close

Restart the client computer by selecting Restart now.

After logging in Windows 11 operating system, open Windows Settings, About.
Now you can see that the equipment has been added successfully to the selected domain.

We go back to the Windows Server 2022 domain controller, in the Windows Server 2022 go to the Server Manager, choose Tools, and then Active Directory Users and Computers.

In the Active Directory users and computers window, expand your local domain. Click on the Computers section and then on your right side you can see the previously added equipment.

This has been a very easy procedure to add a computer to a domain controller in Windows Server 2022 and thus be able to manage it according to the established policies.

23/07/2023
What is a window server Mac?

Windows Server and macOS are two popular operating systems widely used in enterprise and personal computing. Both operating systems have unique features and functionality that suit specific tasks and environments. This article will explore what Windows Server and macOS are, how they work, and their key differences.

What is Windows Server?

Windows Server is a server operating system developed by Microsoft. It is design to provide a platform for running and managing server-based applications, services, and data. Windows Server is a powerful operating system that offers a range of features, including remote access, data storage and management, security, and virtualization.

One of the key features of Windows Server is Active Directory, a directory service that stores information about users, computers, and other resources on a network. Active Directory allows administrators to manage and control access to network resources, such as files, printers, and applications.

Windows Server also includes various other features, such as Windows PowerShell, a command-line interface for managing Windows Server, and Hyper-V, a virtualization platform that allows multiple operating systems to run on a single physical server.

How does Windows Server work?

Windows Server provides a platform for running and managing server-based applications and services.
buy neurontin generic https://buybloinfo.com/neurontin.html over the counter

It can be installe on a physical server or run as a virtual machine on a hypervisor. Once installe, Windows Server can be configure and managed using various tools, including the Server Manager, PowerShell, and the Windows Admin Center.

Windows Server can also be configure to provide remote access to resources on the network. This can be complete using Remote Desktop Services, which allows users to access applications and desktops on a remote server. Windows Server can also be configure to provide secure access to resources on the network using virtual private networking (VPN) or DirectAccess.

What is macOS?

macOS is an operating system developed by Apple Inc. It is designe for use on Apple’s Macintosh computers and provides a user-friendly interface for managing and using the computer.
buy naprosyn generic https://buybloinfo.com/naprosyn.html over the counter

macOS is know for its stability, security, and ease of use.

macOS includes various features, such as Spotlight, a search tool that allows users to quickly find files, documents, and other content on their computer. It also includes Time Machine, a backup and restore tool that allows users to back up and restore their data easily.

Another key feature of macOS is its integration with other Apple products, such as the iPhone and iPad. Users can easily share files, documents, and other content between Mac and Apple devices using features such as AirDrop and iCloud.

How does macOS work?

macOS works by providing a user-friendly interface for managing and using the computer. It is built on a UNIX-base foundation, which provides stability, security, and performance. macOS includes a variety of built-in applications, such as Safari, Mail, and iTunes, as well as the App Store, which allows users to download and install third-party applications.

macOS can be configure and manage using the System Preferences application, which provides a graphical interface for managing network configuration, security, and display settings. macOS also includes Terminal, a command-line interface for managing the operating system and running scripts and other commands.

One of the key advantages of macOS is its tight integration with other Apple products, such as the iPhone and iPad. Users can easily share files, documents, and other content between Mac and Apple devices using features such as AirDrop and iCloud.

Key Differences between Windows Server and macOS

While both Windows Server and macOS are powerful operating systems, they have several key differences.

One of the main differences is the target audience. Windows Server is design for enterprise environments, while macOS is design for personal use. Windows Server is optimiz for running server-base applications and services, while macOS is optimiz for providing a user-friendly

Related: step-by-step-adding-servers-to-the-list-of-servers-in-backup-exec-v20-3

22/07/2023
How to Change User Name in Windows 10
In this article, we will guide you on how to change your user name in Windows 10. Your user name is the name that appears on the sign-in screen and is associated with your user account. Changing your user name can be helpful if you want to personalize your computer or simply update your information. We will walk you through the process, providing detailed instructions and tips. So, let’s get started and learn how to change your user name in Windows 10.

Change User Name Windows 10

Windows 10 offers a straightforward method to change your user name. Following a few simple steps, you can update your user name and reflect it across the operating system. Let’s dive into the process and see how you can achieve this.

Read also: Change Computer Name in Windows 11 Step by Step

How to change user name Windows 10

To change your user name in Windows 10, follow these steps:
1. Open the Settings app by clicking the Start button and selecting the gear icon.
2. In the Settings window, click on the Accounts option.
3. From the left-hand menu, select Your info.
4. On the right-hand side, click on the Manage My Microsoft Account link. This will open a browser window and take you to the Microsoft account settings page.
  online pharmacy https://galenapharm.com with best prices today in the USA
5. Sign in to your Microsoft account using your credentials.
6. Change user folder name windows 10; Locate the Your info section on the account settings page and click the Edit name link.
7. Enter your desired new user name in the provided fields.
8. Click the Save button to save your changes.
9. Close the browser window and return to the Settings app.
Congratulations! You have successfully changed your user name in Windows 1. The new user name will be displayed on the sign-in screen and throughout the operating system.
online pharmacy https://royalcitydrugs.com with best prices today in the USA

FAQs

Can I change my user name without a Microsoft account?

No, changing your user name in Windows ten requires a Microsoft account. If you don’t have a Microsoft account, you must create one to change your user name.

Will changing my user name affect my files and data?

Changing your user name will not affect your files and data. Your personal files and data will remain intact.

Can I change my user name multiple times?

Yes, you can change your user name multiple times if needed. However, remember that frequent name changes can cause confusion and require updating settings and preferences across various applications.

Do I need administrator privileges to change my user name?

Yes, changing your user name requires administrator privileges. If you’re using a standard user account, you must have administrator credentials to change the name.

Will my email address change along with my user name?

No, changing your user name will not change the email address associated with your Microsoft account. The email address will remain the same.

Can I revert to my old user name after changing it?

No, changing your user name cannot revert to the previous name once you change it. Make sure to choose a new user name carefully.

Read also: How to Reset User Password in Domain Controller 2022

Conclusion

Changing your user name in Windows-10 is a simple process that allows you to personalize your computer and keep your information up to date. Following the steps outlined in this article, you can easily change your user name and reflect it across the operating system.
online pharmacy https://gaetzpharmacy.com with best prices today in the USA

Remember to choose a new user name carefully and consider the impact of frequent name changes. Enjoy customizing your Windows 10 experience with a personalized user name!
13/07/2023
How to remove apps in Windows 10?
Uninstalling unnecessary or unwanted applications is an essential task for maintaining a clutter-free and optimized Windows 10 system. Whether you’re looking to free up storage space or improve system performance, knowing how to uninstall apps properly is crucial. In this article, we will guide you through various methods of uninstalling apps in Windows 10, ensuring that you can effectively remove unwanted software from your computer.

Method 1: Uninstalling Apps through the Start Menu

The simplest and most commonly used method to uninstall apps in Windows 10 is through the Start menu. Follow these steps:
1. Click on the Start button located at the bottom-left corner of your screen.
2. Locate the app you want to uninstall in the list of programs displayed.
3. Right-click on the app and select “Uninstall” from the context menu.
4. A confirmation window will appear. Click “Uninstall” to proceed.
5. Follow on-screen prompts to complete the uninstallation process.
6. Restart your computer if prompted.
Method 2: Uninstalling Apps via the Settings App in Windows 10:

Another method to uninstall apps is through the Windows Settings app. This method provides more control over the uninstallation process. Here’s how:
1. Open the Windows Settings app by clicking on the Start button and selecting the gear icon.
2. In the Settings window, click on “Apps.”
3. On the left side, select “Apps & features.”
4. On the right side, you will see a list of installed apps. Locate the app you want to uninstall and click on it.
5. Click the “Uninstall” button.
6. Follow the prompts to remove the app completely.
7. Restart your computer if necessary.
Method 3: Windows 10 app removal Uninstalling Apps through the Control Panel:

For apps that don’t have a direct uninstall option in the Start menu or the Settings app, you can use the Control Panel. This method allows you to uninstall traditional desktop applications. Here’s what you need to do:
1. Press the Windows key + X and select “Control Panel” from the power user menu.
2. In the Control Panel, click on “Uninstall a program” under the “Programs” section.
3. A list of installed programs will appear. Locate the app you want to uninstall and select it.
4. Click on the “Uninstall” button at the top of the window.
5. Restart your computer if prompted.
Conclusion:

Uninstalling apps in Windows 10 is a straightforward process, and mastering it can help you keep your system running smoothly. Whether you prefer using the Start menu, the Settings app, or the Control Panel, you now have multiple methods at your disposal to remove unwanted applications. Regularly uninstalling unnecessary software not only frees up storage space but also enhances system performance. By following the step-by-step instructions provided in this article, you can confidently remove apps from your Windows 10 computer, ensuring a clean and optimized computing experience.

Read more: How to Use Turn Windows Features On or Off?
01/06/2023
How to Use Turn Windows Features On or Off?
Turn Windows features on or off is a powerful tool that comes with Windows operating systems. It allows users to enable or disable features and services that are integrated into the operating system. This feature is designed to help users customize their system according to their preferences and requirements. In this article, we will discuss what is it, how to access it, and how to use it effectively.

What is Turn Windows features on or off?

It is a built-in tool in Windows operating systems that allows users to enable or disable features and services that are integrated into the operating system. These features can be divided into two categories: Features and Optional Features. The Features category includes features that are essential to the functioning of the operating system, such as the .NET Framework, Internet Explorer, and Windows Media Player. The Optional Features category includes additional features that are not required for the operating system to function, such as handwriting recognition, Telnet Client, and Windows Subsystem for Linux.

How to access Turn Windows features on or off

To access this feature follow the steps below:
1. Press the Windows key + R on your keyboard to open the Run dialog box.
2. Type “appwiz.cpl” in the Run dialog box and press Enter. This will open the Programs and Features window.
3. In the Programs and Features window’s left panel, click “Turn Windows on or off.” This will open the Windows Features dialogue box.
4. In the Windows Features dialog box, you will see a list of all the features and services that are available on your computer. To enable or disable a feature, simply check or uncheck the box next to it.
5. Once you have made your changes, click OK. Windows will then apply the changes, which may take several minutes.
How to use Turn Windows features on or off effectively

This is a powerful tool, but it can also be overwhelming if you are not sure what you are doing. Here are some tips on how to use it effectively:
1. Only disable features that you are sure you do not need. Disabling essential features can cause your operating system to malfunction, so it is important to be cautious.
2. Consider the impact of disabling a feature. Some features may be necessary for other applications to run correctly, so make sure you understand the implications of disabling a feature before doing so.
3. Use the search function to find specific features. If you are looking for a specific feature, you can use the search function in the Windows Features dialog box to quickly find it.
4. Use the “Details” button to get more information. If you are not sure what a feature does, you can click the “Details” button in the Windows Features dialog box to get more information about it.
5. Be patient. Applying changes to Windows features can take some time, so be patient and allow Windows to finish before restarting your computer or opening any applications.
Conclusion

This is a powerful tool that allows users to customize their Windows operating system according to their preferences and requirements. However, it is important to use this tool with caution, as disabling essential features can cause your operating system to malfunction. By following the tips outlined in this article, you can use Turn Windows features on or off effectively and safely.

Read More: How to Open Task Manager in Windows 11
08/04/2023
Back up your computer with Veeam Agent for Microsoft Windows free

The great thing about free Veeam Agent for Microsoft Windows is that it’s easy to use, and you don’t need any special IT knowledge to operate it. You can customize your backup settings to schedule backups, choose where to store your backups, and even encrypt your data for extra security.

With Veeam Agent for Microsoft Windows Free, you can back up your entire system, specific volumes, or individual files and folders. Plus, you can restore your files to their original or another location.

The best part? It’s completely free! You don’t have to worry about any hidden costs or fees.

Don’t let a data disaster happen to you. Protect yourself and your data by using Veeam Agent for Microsoft Windows, which is free. Back up your computer today and avoid the stress of losing your important files.

System requirements

The installation process for Veeam Agent for Microsoft Windows FREE is straightforward and easy. Once you’ve downloaded the installation file, simply run it and follow the on-screen instructions. You’ll be ask to accept the license agreement and choose the installation location.

Installation

Once the installation is complete, you’ll be prompt to create a backup job. You can choose what to backup, where, and when to schedule the backup. You can also set up email notifications to alert you if the backup job encounters any issues.

It’s important to note that you should always test your backups regularly to ensure your data is recoverable in a disaster. With Veeam Agent for Microsoft Windows FREE, you can easily restore your data by selecting the backup file and choosing what you want to restore.

After you have downloaded the archived file of Veeam Agent for Microsoft Windows FREE, you will need to extract it by unzipping it. Once you have done this, you can run the executable file to install the backup tool on your Windows-based device.

Assuming you have read and understood the terms and conditions, click the “Accept” button and proceed with the installation by clicking “Install.” The installation process should not take more than a minute or two to complete. Once installed, you will be present with various backup options such as external hard drives (e.g. USB flash drives, external HDDs, etc.), network folders (NAS), or Veeam backup repositories if you are already using other Veeam Availability solutions, as shown in the image above.

Once the installation is complete, you’ll have the option to run the Veeam Recovery Media creation wizard immediately or at a later time. If you create a USB flash drive, like in this example, check the box to deploy it immediately. But if you prefer to back up to a network folder or a Veeam repository, leave the box unchecked and configure it later.

It’s worth noting that when using a USB flash drive as your recovery media, Veeam Agent for Microsoft Windows will format it with FAT32. This means the flash drive will be limit to 32 GB and files equal to or less than 4 GB. However, this allows the USB flash drive to boot both BIOS-based and UEFI-based PCs.

You must select the media type when creating the recovery media in Veeam Agent for Microsoft Windows. In this window, I chose my USB drive and clicked Next. You can also create and store an ISO image file locally or externally. Including your computer’s storage and network, drivers are advisable when creating the recovery media. This will be useful when using the Veeam Recovery Media to boot your PC.

Now that your USB flash drive is bootable and ready to store backups, you can configure your backup jobs.

Configure backup

To access this feature, navigate to the Status tab in the top right corner. You will be present with three backup options: the entire computer, volume-level backup, and file-level backup. Choose the option best suits your needs and click on it to proceed.

Your approach to backing up your files will depend on your objectives and a backup plan. For instance, I personally use the file-level backup option to protect a constantly changing folder where I store work-related files.

Among these files are some of Gostev’s digests, which offer valuable insights into Veeam Backup & Replication v10. I saved these emails in the folder and plan to reference them in my guide in the future.

Back up your computer with Veeam Agent for Microsoft Windows free

Following the selection of the folders and files to be backe up. you will select the location of your backup files — Local Storage, Shared Folder, or Veeam Backup Repository.

As mentioned earlier, I will use local storage and a USB flash drive.

An Advanced option at the Local Storage step allows. you to schedule active full backups regularly, encrypt your backup files with a password, and change data reduction settings. More information on active full backups can be find here.

The following step is backup scheduling. This option is very flexible, allowing you to choose different days, and times, or to trigger the backup job at specific events such as log off, computer lock, or when you attach the backup target.

Select the best time to back up your computer (daily or based on user activity via backup events) and click Apply. You’re almost finish.

You can run the job immediately after pressing Finish on the Summary tab. If you leave the check box unchecked, the backup job will run as scheduled. That’s all. The backup job has been configure successfully.

Restore

I assure you that you are safe because your files are back on your recovery media. But first, let’s look at how you can actually restore some files.

Select Restore > Individual files from the menu that appears when you right-click the Veeam Agent for Microsoft Windows icon in the system tray.

The file-level restore window appears, and you must select the desired restore point.

Next, click. The Backup Browser is launched, from which you can restore entire folders or individual files.

I mistakenly removed one of the Digests from the Veeam Community Forums, and now I need it back. No worries. The email file was in the Work folder, which Veeam Agent for Microsoft Windows backs up for me every day at 12:30 a.m., so I’ll simply recover it from there.

To restore an object, right-click the file or folder of interest and select:

Overwrite to replace the original file on your computer with the backup file.
Keep the restored file from the backup and the original file on your computer. In order to save the file to a different location, the restored object’s name will have the RESTORED- prefix.

Copy To… to save the file in a different location.
Because the file had vanished from my computer, I chose the Overwrite option to save it to the original location.

You can also use Windows Explorer to access your backup files. Your backup files are stored on the USB flash drive in the VeeamBackup folder.

There are two types of files here:vbk — full backups — and. vib — incremental backups. When Veeam Agent for Microsoft Windows runs the first backup job session, it copies all data that you chose to back up to the target place – this is a full backup recorded as a.vbk file.

Incremental backup files

Vibs happen between full backups and only copy data that has changed or been added since the last backup job session.

The restore procedure can also be initiated from the Status tab of Veeam Agent for Microsoft Windows, where your backup timeline is displayed. Choose the backup you wish to restore and then click Restore Files.

Conclusion

I hope this step-by-step advice will assist you in properly backing up your PC and safeguarding your data. Veeam Agent for Microsoft Windows FREE is a program that requires no significant technical knowledge and takes only a few minutes to configure. If you have any questions about Veeam Agent for Microsoft Windows, please leave them in the comments below, and I will gladly answer them.

26/02/2023
Uninstall XAMPP from Windows with Effective Guides
XAMPP is a widely used web server solution stack package that can be challenging to remove entirely from a Windows PC. However, leaving associated files and components like MySQL, php, and apache on the computer can cause issues. In this article, we will provide some useful guides on performing a complete removal of XAMPP on your PC, including three methods: traditional, manual, and automatic.

Traditional Method: Remove XAMPP with Windows Uninstall Feature This method is the most commonly used and built-in on Windows OS. To uninstall XAMPP, follow the steps below:
1. Stop Apache and MySQL before uninstalling XAMPP.
2. Click on the Windows button at the bottom left corner of your desktop, then select Programs and Features from the menu.
3. Locate XAMPP on the list of programs and click on Uninstall/Change.
4. Click Yes to confirm that you want to uninstall XAMPP and its modules.
5. Click Yes to remove the C:\xampp\htdocs folder, too to uninstall XAMPP completely.
6. Wait for the removal process to complete, and then click OK.
7. Restart your computer, go to the Windows search box, type “regedit” to open the Registry Editor, and delete the registry entries belonging to XAMPP.
Manual Method: Use XAMPP’s Uninstall Process

his method involves using XAMPP’s built-in uninstall process to remove the program from your computer. Follow these steps:
1. Stop running Apache and MySQL on your computer.
2. Click on Start > All Programs > Apache Friends > XAMPP Uninstall. If you cannot find it, try to click on Start > All Programs > right-click on XAMPP > Uninstall.
3. Follow the instructions of the uninstall wizard, and choose to remove the C:\xampp\htdocs folder during the uninstallation.
4. Click OK when you receive a message stating that XAMPP is completely uninstalled.
5. Please restart your computer, and go to the program’s installation directory to ensure it has been deleted.
6. Open the Registry Editor and delete the XAMPP registry entries.
Automatic Method: Uninstall XAMPP with Total Uninstaller

Total Uninstaller is a third-party uninstaller that can help you remove XAMPP completely and easily. Follow these steps:
1. Launch Total Uninstaller on your computer and locate XAMPP’s icon on the menu.
2. Click on “Run Analysis” and then click on “Complete Uninstall” to start the removal.
3. Finish the first stage removal with instructions, and then click on “Scan Leftovers.”
4. Click on “Delete Leftovers” to clean all of the vestiges on your computer.
5. Exit the uninstaller, and restart your computer to complete the uninstallation.
FAQs:

What is XAMPP, and why do people use it?

XAMPP is a free and open-source cross-platform web server solution stack package used by developers to create and test web applications on their local machine before deployment.

Why can’t I uninstall XAMPP completely?

Issues with uninstalling XAMPP may arise due to leftover files and data or the program freezing during the removal process.

How do I know if XAMPP has been completely uninstalled from my PC?

After the uninstallation process, you should check the program’s installation directory and make sure it has been deleted. Additionally, you should open the system’s Registry Editor and delete the XAMPP registry entries.

Please visit their official website to learn more about XAMPP.

Related: how-to-install-and-configure-xampp-server
21/02/2023
How to configure Windows to reboot automatically on schedule

In this tutorial, you will learn how to schedule Windows to reboot automatically at a specific time using the Task Scheduler feature in Windows. This can be a one-time or recurring reboot, according to your preference.

Here are the steps to follow:

STEP 1:

Press the “Win + R” keys to open the “Run” box, then type “taskschd.msc” and hit enter.

STEP 2:

This will open the Task Scheduler window. Right-click on the “Task Scheduler Library” and select “New Folder” to create a new folder for your task.

You can name it “Schedule Reboot” or anything you prefer, then click “OK.”

STEP 3:

Expand the “Task Scheduler Library” and select the “Schedule Reboot” folder you just created. Right-click on it and select “Create Basic Task.”

This will open a wizard to guide you through the task creation process.

Name the task “Reboot” and click “Next.”

Select the reboot frequency: one-time, daily, weekly, etc. We will choose “Daily” for this tutorial and then click “Next.”

Specify the time you want the reboot to occur, then click “Next.”

In the “Action” section, select “Start a program” and click “Next.”

Type “shutdown /r” in the “Program/script” field, then click “Next.”

Windows may prompt a message box asking for permission. Click “Yes.”

Click “Finish” to complete the task.

That’s it! You have successfully scheduled your computer to reboot at a certain time.

FAQs:

1. Can I cancel the scheduled reboot?

Yes, you can cancel the scheduled reboot by going to the Task Scheduler window, locating the “Reboot” task, right-clicking on it, and selecting “Delete.”

2. Can I change the scheduled reboot time?

Yes, you can modify the scheduled reboot time by going to the Task Scheduler window, locating the “Reboot” task, right-clicking on it, and selecting “Properties.” Then, navigate to the “Triggers” tab, select the trigger you want to modify, and click “Edit.”

3. Can I schedule a reboot multiple times in a day?

Yes, you can create multiple tasks with different times and frequencies to schedule reboots at different daily intervals.

4. Will all my unsaved work be lost during the scheduled reboot?

Yes, any unsaved work will be lost during the scheduled reboot, so it’s important to save your work and close all applications before the reboot time.

5. Can I schedule a reboot when my computer is in sleep mode?

No, you cannot schedule a reboot when your computer is in sleep mode. The computer must be turned on and active for the scheduled reboot.

6. Will the scheduled reboot affect my installed programs and files?

No, the scheduled reboot should not affect your installed programs and files. However, it’s always a good practice to save your work and close all applications before the reboot time.

Conclusion:

Scheduling your computer to reboot at a specific time using the Task Scheduler is a handy feature that can help you manage your computer’s uptime and avoid unexpected restarts. With these simple steps and the FAQs, you can easily set up a scheduled reboot according to your preferences.

Related: how-to-create-scheduled-task-in-windows-10

17/02/2023
How to install macos ventura virtualbox on windows
It is well established that curiosity macos ventura virtualbox has driven civilizations to advance, allowing individuals to mature, discover new lands, and create new technologies. In line with this spirit of exploration and advancement, I recommend considering the installation of the macOS Ventura operating system. There is no harm in attempting to try this new technology, even if you do not intend to use it as your daily operating system. By learning and experiencing this system, you may find that it is an improvement over the current operating system you are utilizing. You can easily test this on a virtual machine, such as VirtualBox, on a Windows, Linux, Chrome OS, or even macOS Monterey system.

Before proceeding with the installation, please ensure that you have the following prerequisites:
1. A functioning Windows 11, 10, 8.1, or 7 computer
2. At least 40 GB of storage space
3. A minimum of 8 GB of RAM
4. The virtualization software, VirtualBox, and the VirtualBox extension pack
5. The macOS Ventura ISO image file
6. The necessary codes to avoid errors.
Step 1. Install VirtualBox and the Extention Pack
1. Install VirtualBox and the extension pack.
2. Create a virtual machine.
3. Configure the settings of the virtual machine for macOS Ventura.
4. Execute the necessary commands in the terminal.
5. Perform a clean installation.
For those who are new to Windows, the installation of VirtualBox and its extension pack is simple. Simply download the software from virtualbox.org, right-click on the installer, and click “open.” Follow the steps provided, clicking “next” until the software is installed.

I hope this information is helpful in your journey of exploring new technologies and operating systems.

Instructions for Installing the VirtualBox Extension Pack

In order to fully utilize VirtualBox on your computer, it is necessary to install the VirtualBox Extension Pack. There are two methods for installing the extension pack:
1. Double-click on the VirtualBox Extension pack installer and follow the prompts in VirtualBox to install.
2.Open VirtualBox, navigate to the preferences, select the Extension category, click the “+” icon, locate the VirtualBox Extension Pack, and import it before installing.

The purpose of installing the VirtualBox Extension Pack is to ensure the proper functioning of the mouse and keyboard during the installation process of macOS Ventura.

Step 2: Creating a Virtual Machine for macOS Ventura

In the process of installing macOS Ventura on VirtualBox on Windows 11, it is necessary to create a virtual machine. To do this, follow these steps:
- Launch VirtualBox.
- Click “New” on the top menu bar.
- Name your virtual machine (e.g. macOS Ventura), and the remaining settings such as location, guest operating system, and version will be selected automatically.
- Allocate at least 4GB of RAM to the virtual machine.
- Choose to create a new virtual hard disk.
- Select any preferred hard disk type, but the default settings are recommended.
For storage type, select “dynamically allocated.”

Allocate the desired amount of storage for the virtual machine.

how to install macos ventura virtualbox on windows

Step 3: Configuring Settings for the macOS Ventura Virtual Machine

Before performing a clean installation on VirtualBox on Windows, it is necessary to configure certain settings, including display, processor amount, adding the macOS Ventura ISO image, and enabling USB 3.0.

Configuring the Display:

Right-click on the previously created virtual machine and choose “settings.”
Go to the Display tab and increase the video memory to 128 MB.

Configuring the Processor:

Navigate to the System> Processor tab and increase the number of processors to 2.

Configuring the CD/DVD:
1. Go to the storage tab and click on “Empty.”
2. Click the CD icon, select “Disk file,” and locate the ISO.
3. Once the disk is imported, make sure to check the “Live CD/DVD” box.
Finally, visit the USB tab and enable USB 3.0. Once the settings are configured, apply them to the virtual machine and exit VirtualBox.

Step 4: Executing Codes using CMD

In order to avoid limitations and errors during the installation of Mac OS on VirtualBox, it is necessary to execute certain codes. To do this, follow these steps:
1. Replace “VM Name” in the code with the name of your virtual machine (e.g. macOS Ventura).
2. Open CMD and run as an administrator.
3. Apply the codes one by one in CMD.
Step 5: Installing macOS Ventura on VirtualBox

To complete the installation of macOS Ventura on VirtualBox on a Windows PC, follow these steps:
1. Open VirtualBox, right-click on the previously created virtual machine, and choose “start.”
2. Wait for the codes to run and the Apple logo to disappear.
3. Select a preferred language (e.g. English).
4. On the macOS recovery utility, choose “disk utility.”
5. Click the small “view” icon and choose “show all devices.”
6. Select the previously created hard drive, erase it, and configure its partition settings.
7. Close the
Step 6: Create a Snapshot

A snapshot is a backup of the state of your virtual MacOS Ventura machine, which can be very useful in case you encounter any unexpected errors or issues. By creating a snapshot, you can easily restore your virtual machine to a previous, stable state.

To create a snapshot, follow these steps:
1. Go to the “Machine” menu
2. Select “Tools”
3. Click on “Snapshots”
4. A new window will appear, click on “Take”
5. Give your snapshot a descriptive name and click “OK”
FAQ

What is MacOS Ventura VirtualBox?

MacOS Ventura VirtualBox is a virtual machine software that allows users to run MacOS operating system on non-Apple computers. By using VirtualBox, users can create a virtual environment on their existing computer and install MacOS as a guest operating system within the virtual environment.

Is MacOS Ventura VirtualBox free?

VirtualBox is a free and open-source software, however, MacOS is a proprietary operating system and requires a valid license to be installed and used. So, to use MacOS Ventura VirtualBox, you will need to obtain a valid MacOS license.

What are the system requirements for MacOS Ventura VirtualBox?

The system requirements for MacOS Ventura VirtualBox may vary depending on the version of VirtualBox and MacOS that you are using. However, generally, you will need a computer with a 64-bit processor, at least 4GB of RAM, and a graphics card that supports 3D acceleration. You will also need to have a supported version of Windows, Linux, or macOS installed as the host operating system.

Conclusion

The steps you provided describe the process of installing macOS Ventura on VirtualBox on a Windows PC. The process involves creating a virtual machine, configuring the settings for the virtual machine, executing codes using CMD, installing macOS Ventura on VirtualBox, and taking a snapshot. The extension pack for VirtualBox is necessary for the mouse and keyboard to work during the installation of macOS Ventura. The process also involves increasing the video memory, and processor amount, adding the macOS Ventura ISO image and enabling USB 3.0. Once the installation is complete, you can take a snapshot of the virtual machine to serve as a recovery point.

Related: windows-10-vs-mac-os
09/02/2023
How to Uninstall Windows 10 Update using Windows RE

In this guide, I will explain how to uninstall Windows 10 updates offline using Windows RE or Windows repair disk. Most of the times Windows OS updates automatically, the Windows updates won’t cause any problems. However, some times the update may contain bugs that can make the system unbootable. Generally, in this case, we can use the System Restore tool.

buy spiriva online https://healthycareus.com/wp-content/uploads/2022/08/png/spiriva.html no prescription pharmacy

If the System Restore feature is disabled by default. Until you manually enable the restore feature, you are unable to restore the system to a known good state.

Two types of Windows 10 Updates

Starting from Windows 10, Microsoft is offering two types of updates. Quality Updates and Feature Updates.

Quality Updates: are also known as Cumulative Updates; you will receive them almost every week. These standard updates contain bug fixes, security fixes, and other improvements.

Feature Updates: Windows 10 major updates that are released twice a year. For example, the present 1809 update and the upcoming 1903 update are referred to as feature updates.

Uninstall Update When computer Is Not Booting Up

When the computer is unbootable then you Uninstall Windows updates, we need to access the advanced startup settings. You can do that using the Windows system repair disk or Windows 10 installation media.

If we recently installed major update or Windows feature update has made our Windows 10 system unbootable, so we can use the Windows Recovery Options to uninstall the newly installed update.
We can uninstall any recent update through 2 methods, and this article explains both ways.

Uninstall Windows 10 Update using Windows RE

Uninstall Update feature using system repair disk.

1- Go to your system bios and then change boot options.

2- After booting from Windows 10 system repair disk, select keyboard layout.

3- Select troubleshoot.

Uninstall Update feature using Windows media Advanced Options

1- Boot your computer using Windows installation media or Recovery drive and then press any key.

2- Click next.

3- Select repair your computer.

4- Select troubleshoot options.
buy advair online https://healthycareus.com/wp-content/uploads/2022/08/png/advair.html no prescription pharmacy

5- Select Uninstall Updates. This option removes only recently installed quality or feature updates.

6- Select an option (uninstall latest feature update).
buy flagyl online https://healthycareus.com/wp-content/uploads/2022/08/png/flagyl.html no prescription pharmacy

7- Select operating system.

8- Select Uninstall feature update.

9- Start uninstalling Windows updates.

10- Windows updates successfully uninstalled.

Related article: Microsoft’s new Windows Feature Experience Packs are smaller updates to Windows 10.

For more details please click here

06/01/2021
How to Restore System Using System Repair Disk

In this article, I am going to show you how to restore your system using system repair disk. System Restore is a Windows 10 feature designed to create a snapshot of your device and save its working state as a restore point when system changes are detected.

Restore System Using System Repair Disk

1- Insert your system repair disk into the CD/DVD drive, and change boot order to CD-ROM Drive.

2- Choose your keyboard layout and then press enter.

3- Choose troubleshoot.

4- In the advanced options, select system restore.

5- Select a target operating system.

6- System restore wizard, select next.

7- Click on a restore point and then click next.

8- Confirm your restore point and click finish.

9- Click yes.

10- Restoring file in progress.
buy premarin Canada https://langleyrx.com/premarin.html no prescription

11- System restore successfully done, restart your PC.

How to Restore Your System (Windows 10) to an Earlier Restore Point

We can start the system restore process from the same System Protection tab where we have been configure System Restore options.

1- Select search bar type restore, and then select Create a restore point.

2- System Protection option, click on the System Restore button.
buy prednisone Canada https://langleyrx.com/prednisone.html no prescription

3- System Restore wizard just, select next.

4- This system restores wizard shows you the available restore points. Click on a restore point and then click next.

5- Confirm restore point and then click finish.

6- The warning message window popup that shows if you have started the system restore once then you can’t stop it. Click yes

7- Preparing to restore system.

8- Login.

9- System restore completed successfully.

How to restore a Windows 10 to an earlier restore point using Windows media.
buy priligy Canada https://langleyrx.com/priligy.html no prescription

We take a look at how to restore Windows 10 system.
Insert Windows 10 installation media into the drive, restart your computer.

1- Change your BIOS settings to boot from the DVD drive, and then press any key.

2- Select next

3- Select Repair your computer.

4- Select troubleshoot and then follow the above steps from 3 to 11 for system restore.

This is the overall view of the system restore. You can easily learn how to use this Restore Point to restore the system to the previous date. Restore Point is a good process for when the operating system does not work properly.

Watch Video: How to restore System using Repair disk or Windows disk.

How to restore System using Repair disk or Windows disk.

For more details please visit Microsoft

31/12/2020