Tag: openfiler

How to Connect Openfiler iSCSI Storage ESXi 7

Openfiler iSCSI Storage ESXi 7, In this article I am going to connect Openfiler to VMware ESXi 7 Host as iscsi storage using VMware ESXi host.

Connect Openfiler ad iSCSI storage to ESXi 7 Host

How to Install Openfiler click here

Configure Openfiler as iSCSI shared storage Click here

1- Open web browser, type your ESXi host name or IP Address, type username and password and click log in.

VMware ESXi 7 Host

2- After login ESXi host, Select Network options, select Virtual switches tab and click Add standard virtual switch.

3- Type a vSwitch name, select your network adapter uplink and click the add button.

4- Virtual switch successfully created.

5- Networking option, select VMkernel NICs tab and click add VMKernel NIC

6- VMkernel NIC wizard, type new port group, select newly created vSwitch1, under IPv4 Settings, click static, type IP Address, subnet mask and then click the create button.

7- VMware NICs successfully created.

8- Select Storage options, Adapter tab and then click Software iSCSI.

9- Select iSCSI enabled, select dynamic targets option, click add the dynamic target, type your openfiler iSCSI storage IP Address and then click save the configuration.

10- Storage option, As you can see Openfiler device shows under the devices tab.

11- Storage option, click Datastore tab and then click new datastore.

12- New datastore wizard, select create new VMFS datastore and then click on Next.

13- Type a datastore name, select Openfiler iSCSI disk and then click on Next.

14- Select partitioning options, use full disk or custom, so select the VMFS version and then click next.

15- Review the Openfiler iSCSI storage ESXi datastore details and then click Finish to complete the process.

16- Datastore successfully added.

If you would like to know more about how to add openfiler iscsi storage then click here

Read more: How to change the Fujitsu Siemens Eternus DX90 Storage disk.

06/04/2020
How to Connect iSCSI Storage VMware vCenter 7 (Openfiler).

Connect iSCSI Storage vCenter 7, In this blog, I will explain how to connect Openfiler iSCSI Storage to VMware vCenter 7.

How to install Openfiler. Click Install Openfiler

How to Configure Openfiler as iSCSI shared storage. Configure Openfiler

Connect Openfiler iSCSI Storage VMware vSphere

1- Open browser, type your vCenter fully qualified name or IP Address, type username and password and then click on login.

2- After login to your vCenter Server, so under home tab click Hosts and Clusters.

VMware vCenter 7

3- Click on ESXi host, Select Configure tab, under Networking, select virtual switches and then click on Add Networking.

4- Select the VMkernel Network Adapter and then click Next.

5- Select new standard switch and click next.

6- Click the + sign to assign network adapter.

7- Select Network adapters and click ok.

8- I have selected one adapter (you can select multiple adapters) click next.

9- Type a Network name and click next.

10- Select use static IPv4 setting and type the IP address, subnet mask and click next.

11- Review the settings and click the finish button to complete the switch configuration.

12- Now vSwitch1 has been created successfully.

Connect Openfiler iSCSI Storage

13- Under Storage, Click on Storage Adapters, Click on + Add Software Adapter to enable software iSCSI adapter.

14- Click the ok button.

15- Select iSCSI software adapter, under dynamic discovery, click the + add the button to add storage target iSCSI server.

16- Type the IP address of your iSCSI server and then click ok.

17- Select the rescan storage tab.

18- Click ok.

19- Click the + Add button under Network Port Blinding to select Network Adapter.

20- Select the VMkernel network adapter and then click OK.

21- Click on rescan storage tab to see configuration changes.

22- Click ok.

23- Select storage devices under storage to see 2 devices shown.

24- Select ESXi Host, storage adapter, Action menu, click storage and then click new Datastore.

25- Select the datastore type and click next.

26- Type datastore name, select one of openfiler iSCSI disk and then click next.

27- Select VMFS version and click next.

28- Select datastore size and click next.

29- Review the new datastore configuration and click finish to complete the process.

30- Datastore LUN has been added successfully.

For more details click here

09/02/2020