Bootable USB Chrome OS The CloudReady USB Maker is that the software for creating a CloudReady USB installer.
You need to create your CloudReady USB installer using a Windows computer.
Bootable USB Chrome OS using CloudReady USB maker
Download the USB Maker from CloudReady and click USB Maker
First, confirm you have downloaded the right version of the CloudReady USB Maker.
Download the CloudReady 64-Bit 32-Bit image from CloudReady and click here Image.
Create a USB installer for CloudReady
3- After downloading open your downloads folder and double click the CloudReady USB maker setup file.
4- Make sure you have a USB stick of either 8 GB and 16 GB capacity and then click Next.
5- Select 64-bit (Recommended) and then click on Next.
6- Insert your bootable USB storage device and then click on Next.
7- Select the target bootable USB device to format and use it as your CloudReady installation device And then click on Next.
Note: It will permanently erase all existing data on the target USB device and then click Next.
8- The bootable USB maker will automatically download extract and format. Make a bootable device for you to employ to put in CloudReady on your target devices.
9- It takes approximately 20 minutes to create the usb chrome OS installer.
10- CloudReady bootable USB created successfully and then click finish.
In this blog, I will be able to install Android Bliss OS on VMware Workstation 15. Below are the links for downloading VMware Workstation 15 and therefore the Android Bliss-OS.
Create a virtual machine for the android emulator in VMware Workstation click create a virtual machine
install Android Bliss OS
1- Run VMware Workstation, then click power on this virtual machine, you’ll see the subsequent screen.
2- Select option, Installation – install Bliss OS to harddisk and press enter.
3- Press C, Select Create/Modify Portions and hit enter.
4- Select no for the use of GPT and hit enter.
5- Now we need to create a new partition, select New and hit enter.
6- Select Primary and hit enter.
7- Select the size that you want for the new partition. I have selected all and hit enter.
8- Select Bootable and hit enter, under the head Flags it should show Boot.
9- Select Write tab. this may create the partition table, which makes sure that you simply can use the new partition for the installation of Android Bliss OS.
10- Type yes and hit enter.
11- Select Quite and you will return to the installation screen of android Bliss OS, with a partition available called sda1.
12- Select sda1 and then press enter for the installation.
13- Select ext4 as the filesystem and then hit enter.
14- Select Yes and then hit enter.
15- Install the boot loader GRUB, select yes and then hit enter.
16- Select Yes and then hit enter to make the system Read-Write.
17- Once it is finished, right-click on the CD/DVD icon and then select disconnect. And then ok.
18- Select the Reboot option and hit enter to restart Bliss-OS.
This article will show how to install Deepin OS in VMware Workstation. Deepin is a user-friendly Debian-based Linux distribution. It is a free and open-source operating system mostly used at the desktop level. The recently stable version of Deepin 20.2 has been released. Deepin 20.2 comes with stable kernel version 5.10 and Debian 10.6 package repositories.
Deepin is an interesting Linux distro developed in China. The Deepin Desktop Environment is Windows-like and is currently optimized for desktop use. Some of the Deepin inbuilt apps such as the screen recorder are well thought out. Deepin is presently lacking in features for touchscreen; for Instance, it does not auto-rotate 2 in 1 adjustable tablet/laptop devices and lacks a utilizable touchscreen keyboard making it meaningfully behind the Zorin/GNOME Desktop Environment for these devices.
Download Deepin 20.2 ISO file on your system from their official website.
Deeping Installation Requirements
Make sure your system meets the following requirements. CPU: Intel Pentium IV 2GHz or higher Memory: 2 GB of RAM, 4GB is recommended Disk: 25 GB free disk space or Higher
Bootable USB Drive
Deepin Boot Maker is a bootmaker developed by Deepin Technology Team. It is very easy to interface and easy to operate. It helps users to simply make a deepin boot disk.
Aside from that, you need to make ready a USB flash drive, or a disc and CD/DVD drive, then visit the Deepin website to download the latest ISO file and then create a boot disk.
Create Bootable USB Drive for Deepin 20.2
Once an ISO file is downloaded on your computer then burn it into a USB pin drive to make it bootable. Here is one third-party Rufus tool to create a bootable USB drive.
Create Bootable USB using Deeping Boot Maker
Go to your download folder, run the deepin-boot-maker.exe file.
Deepin boot maker wizard, click on select an ISO image file.
Click on deepin desktop community and then click open.
After select deepin ISO file click next.
Select your USB media and click start making.
Making bootable is in progress.
Make successfully USB bootable deepin boot maker.
Create a Virtual Machine
How to create a virtual machine for the android emulator in VMware Workstation.
Launch VMware Workstation, select file tab, and then select New Virtual Machine.
Click the browse button to select a guest operating system installation (deepin desktop community 20.2 ISO file).
Select deepin desktop community 20.2 ISO file and then click open.
Click next
Select the operating system, its version, and then click Next.
Type a virtual machine name, location and then click Next.
Click next
Select memory for the virtual machine and click next.
Virtual machine network type, click next.
Click next
Disk type, click next.
Choose to create a new virtual disk and then click Next.
Specify disk capacity and then click next.
Click next.
Ready to create a virtual machine, click finish.
Usually, the system boots from a hard disk, so before deepin OS installation, you must enable system BIOS to set boot priority from CD/USB flash drive. For a desktop computer, press the Delete key, and for a notebook, press the F2, F10, or F12 key to enter BIOS settings.
Select the installation language from the list, select I even have read and comply with deepin the software end-user license agreement and then click on next.
Friendly page, click next.
Create partitions deepin OS, select the installation disk, and then click next.
Deepin emulator ready to install, click continue.
Deepin 20.2 installation is in progress, It will take some time. Wait until the installation process completes.
Deepin Android OS 20.2 successfully installed, Remove the installation media before reboot.
Click reboot now to reboot the virtual machine.
Deepin booting.
Deepin Configuration
Select language, accept deepin end user license agreement and then click Next.
Select a keyboard layout and click Next.
Choose your time zone and then click next.
To install Deepin 20.2, create a new user type password (repeat password) and then click next.
Applying changes.
After rebooting Deepin OS, type your Deepin OS password and then hit enter.
Deepin will detect. You need to choose between two modes, Effect Mode and Normal Mode.
Deepin OS home screen.
Deepin OS apps.
Watch Video: Install Deepin OS in VMware Workstation
18- Once it is finished, right-click on the CD/DVD icon and select disconnect. and then click ok
19- Select the Reboot option and then hit enter to restart android.
If android Oreo 8.1 not booting then follow the below steps.
20- Press the e button to edit this command before booting.
21- Press the e button again.
22- Now move the cursor to left-hand. Replace quiet parameter with nomodeset xforcevesa, then hit enter to save lots of and then hit the b button else.
23- Android Screen comes up.
Setup Android 8.1
24- Android Oreo 8.1 welcome screen appears, so click Start.
25- Connect your device to Wi-Fi or click skip to connect later.
26- Wi-Fi connected successfully.
27- Select set up as new.
28- I did skip Google sign in. (you can log in with your Gmail account)
29- Select skip account setup.
30- Select Agree.
31- Type a name and then click Next.
32- Click no thanks.
33- Once the configuration is finished, so you should see the following screen.
In this guide, I am going to create a new virtual machine for the android emulator in the VMware workstation to install an Android emulator.
1- Open VMware Workstation, select the file tab and choose a new virtual machine.
2- Select the custom settings and click next.
3- Leave the default settings for the virtual machine hardware compatibility version and click on next.
4- Select I will install the operating system later and click on next.
5- Under the guest operating system, select other options, under version, select the other 64-bit and click on next.
6- Type a name for the virtual machine, choose a location to save or leave it as the default and click on next.
7- Choose the number of processes for the virtual machine, the cores per processor and click next.
8- Select the memory you want to assign to the virtual machine and click on next.
9- Select the network type, leave it to default and then click on Next.
10- Select the SCSI controller. Select LSI Logic (recommended) and then click on Next.
11- Select the Disk type, IDE (Recommended) and then click on Next.
12- Select create a new virtual disk option for the virtual machine and then click on Next.
13- Specify the disk capacity (20 GB) and then click on Next.
14- Specify the disk file and then click on Next.
15- Ready to create a virtual machine for the installation, of the Android operating system, so click customize hardware.
16- Select CD/DVD (IDE) settings and click the browse button to select your downloaded android iso image file.
17- Select the display settings and enable 3D graphics, graphic memory, This is very important for the Android Operating System to run, click close and then click finish.
