1- Double click to run VMware vCenter converter shortcut from your desktop and then click on Convert Machine.
2- Select source type Powered on > select this local machine and then click on next.
3- Select destination type to VMware Workstation or other VMware virtual machine.
Change Select VMware product to VMware Workstation 11.x.
Create a reputation for the VM > click browse to pick a location to save lots of the VM and then click on next.
4- On the Options screen, under Data to copy click Edit.
Make ensure that you have selected disk C: change destination size to Minimum size.
Under Devices, click Edit on the Memory tab, change Memory allocation to the recommended value and then click next.
5- Review the conversion parameters and Click Finish to start the conversion. This can typically take an hour or more. It Depends on the Virtual Machine size.
6- Go to your VM created windows explorer folder and check that .vmx and .vmdk files were created.
7- Select the file and then click open.
8- Browse the location where you saved the VM (.vmdk) and then click open.
9- Now Virtual Machine is listed in VMware Workstation, now click power on this virtual machine to start.
VMware vCenter Converter Standalone is a free VMware’s product to convert physical machines to virtual machines and also backup images to VMware virtual machines.
Install VMware Workstation Player so, Download VMware Player 15 from VMware website.
Install VMware Workstation Player
1- Double click on VMware-player-15 setup file to start out the installation. you would possibly see Security Warning Click Yes continue.
2- VMware Workstation 15 player setup wizard will start, click next.
3- Select I accept the terms within the License Agreement and click on next.
4- Select the Installation Directory in which you want to install the application. Or leave it as Default. Also, check the box Enhanced Keyboard Drivers option and click next.
5- Select the options to check the product updates at Startup and select join the VMware Customer Program. The default settings are selected and then click Next.
6- Select Desktop and Start Menu Programs folder and then click Next.
7- Click on install to start the installation.
8- Installation running process, so wait for it to complete.
9- Press the license button below if you want to enter a license key now or click on the finish for the trial, you will have 30 days trial.
10- Enter your 25 digit license key and then click on Enter.
11- Click Finish to complete the installation.
You may be asked to restart your system. Click on Yes to restart. Click No, if you want to restart later.
12- Open VMware Workstation 15 Player from your desktop.
Create Virtual Machine in VMware Workstation 15, first we need to download VMware Workstation and install
1- After Launching VMware Workstation click create a replacement Virtual Machine.
2- Select the sort of virtual machine you would like to make and click on next.
Note: Custom – this provides you a choice to create a virtual machine and choose its hardware compatibility. you’ll choose between Workstation 15.x, Workstation 14.x, and etc.
3- Select hardware compatibility and click next.
4- Select your guest operating system (OS) You can install the OS using.
Installer disc (CD/DVD)
Installer disc image file (ISO) I am selecting .iso > click on Browse and select the operating system you want to install and click next.
5- Enter your Product Key. Select Version of Windows to install
Create a user name and password and click next.
6- Type a virtual machine name and specify a location for virtual machine files to be saved or leave it as default settings and click next.
7- Select Firmware Type and then click on Next.
8- Select the number of processors and then click on next.
9- Select the number of Memory for this virtual machine and then click on next.
10- Select the network type and then click on Next.
11- Default Setting Recommended, then click on next.
12- Default settings recommended, so click on Next.
13- Select create a new virtual disk option and then click on Next.
1- Open VMware Workstation, select the file tab and choose a new virtual machine.
2- Select the custom settings and click next.
3- Leave the default settings for the virtual machine hardware compatibility version and click on next.
4- Select I will install the operating system later and click on next.
5- Under the guest operating system, select other options, under version, select the other 64-bit and click on next.
6- Type a name for the virtual machine, choose a location to save or leave it as the default and click on next.
7- Choose the number of processes for the virtual machine, the cores per processor and click next.
8- Select the memory you want to assign to the virtual machine and click on next.
9- Select the network type, leave it to default and then click on Next.
10- Select the SCSI controller. Select LSI Logic (recommended) and then click on Next.
11- Select the Disk type, IDE (Recommended) and then click on Next.
12- Select create a new virtual disk option for the virtual machine and then click on Next.
13- Specify the disk capacity (20 GB) and then click on Next.
14- Specify the disk file and then click on Next.
15- Ready to create a virtual machine for the installation, of the Android operating system, so click customize hardware.
16- Select CD/DVD (IDE) settings and click the browse button to select your downloaded android iso image file.
17- Select the display settings and enable 3D graphics, graphic memory, This is very important for the Android Operating System to run, click close and then click finish.
Install VMware Workstation 15 Pro, first, we need to download VMware Workstation from VMware website VMware Workstation. Download the software for windows.
Install VMware Workstation 15 Pro
1- Double click to launch the VMware-workstation-full-15 application.
2- Security warning panel and click on Run to continue.
3- Initial screen will appear, wait for the process to complete.
5- Select I accept the terms within the License Agreement and click on next.
6- Select the directory during which you’d wish to install the appliance Also select Enhanced Keyboard Driver checkbox and click on next.
7- Leave it to defaults Settings and click next.
8- Select both the options desktop and start Menu Programs Folder and click next.
9- Click Install to start the installation process.
10- Installation in progress, wait for this to complete.
11- Press the license button below if you want to enter a license key now or click on the finish for the trial, so you will have 30 days trial.
12- Enter the 25 character license key in the dialog box shown below and then press enter.
13- Installation completed – click finish and you are done with the installation process. You may be asked to restart your computer and then click on Yes to restart.
14- After the installation completes. So, double click on VMware Workstation 15 Pro to launch the application.
In this article, I will describe how to Fujitsu Siemens Eternus DX90 drive replacement, a failed disk force between the disk drives that carry up a RAID volume. Replace the failed disk force with a new disk drive of the same capacity.
Fujitsu Siemens Eternus DX90 Drive Replacement
1- Open browser and sort your eternus s2 IP Address press enter and login with user id and password.
Username – f.ce
Password – (check-code) + (Storage Serial Number)
2- After the login System message appears.
P 80400009-DISK
Failed parts exist please check the details by the
component navigation.
Hardware Components
Error Disk 1
System Information
Status Error
3- Select System Menu
Under Action Click Start/End Maintenance.
4- Fujitsu Siemens eternus s92, click ok.
5- Read the State of Maintenance and Click Start.
Note: while the storage system is in maintenance mode on power control by external power synchronization apparatus are going to be disabled please end maintenance mode or execute if with the facility button of the panel once you power off.
6- Click OK.
7- Maintenance Processing.
8- Now Maintenance Mode ON.
Select Component Menu and click Disks here you can view the # of Broken Disk.
9- Under Component Menu Select Controller Enclosure and Select Front View of your Enturns DX90 storage. Here you can find the Broken Hard Disk Slot front view.
10- 600 Gigabytes Seagate Hard Disk with the same serial number.
11- just swapped out the drive and replaced with the new one.
12- After replacing the hard disk it’s automatically started Rebuild/Copyback data.
13- Click the Hard Disk Slot # the replaced one and view summary.
Backup Exec sets up this sort of conversion as a stage that runs after the backup job runs. The backup sets that are created from the backup job are wont to create the virtual machine.
Convert Backup to Virtual Machine Backup Exec
On the Backup and Restore tab, right-click the server that contains the info you would like to copy and convert.
1- Select Backup, and then select Back Up to Disk and then Convert to Virtual Machine.
Restore files and folders veritas backup exec, If you recognize which backup set, completed the backup job, or memory device media contains the info that you simply want to revive, you’ll start the Restore Wizard from there. Otherwise, you can select the server, then start the Restore Wizard.
Restore Files and Folders Veritas
1- On the Backup and Restore tab, right-click the server for which you want to restore data and click Restore.
2- Select Files, folders, or volumes and click Next.
1- On the Backup and Restore tab > select the server you want to back up > Select Backup and Restore > Backup and select Back up to Disk.
2- Select Agent-based backup (Files & Folders) and click next.
3- under Backup definition properties, so click test/edit credentials.
4- Select the logon account > click Test All after success and then click OK.
5- Under backup definition properties click Edit > Expand the server and select files & folders you want to backup (I selected Documents and Downloads) and then click ok.
6- Under backup, so click Edit.
7- Under Backup options,> click Schedule, and then select when you want the backup job or jobs to run.
8- Click Storage, and then select the storage device that you want to use for the backup job or jobs.
9- Select this option to specify the network interface that Backup Exec users to access remote computers.
10- Each backup job and stage can be configured with different notification recipients. Backup Exec will notify people by email or text message.
In the left pane, select any additional options that apply to the backup job or jobs.
On the left side, select any additional options that apply to the backup job or jobs.
And Click OK to save the backup Settings.
On the left side, select any additional options that apply to the backup job or jobs.
And Click OK to save the backup (files & folders) Settings.
11- Click OK to complete the Settings.
12- The backup jobs and stages run at the time that you selected.
Or you can right-click the job and then click Run Now.
13- Click Yes to start a backup job.
14- Select the Job Monitor and so monitor the running job.
Veritas Backup Exec allows you to restore virtual machine VMware data to either the situation from which the info was protecting or to a special location. Restoring data to a special location is mentioned as a redirected restore.
The Virtual Machine Disk Format .vmdk file for a virtual machine. Individual files & folders are protected from inside the vmdk file and individual items from Microsoft SharePoint, Exchange, SQL, or Active Directory.
3- On the Resource View tab > expand the virtual host server name or the virtual machine name > select the items that you want to restore and then click next.
4- Select To a different vCenter or ESX server (you can also select to the original location) and then click next.
5- Expand the vCenter server and select the datastore where you want to save VM machine and click ok.
6- Type the name of the vCenter Server or ESX/ESXi host that you want to restore to, or click Browse to search for the server.
Select the right logon account for the server that you simply want to revive the info to.
Click Browse next to the Virtual machine folder to select the folder to which you want to restore.
Click Browse next to the Resource pool to select the resource pool to which you want to restore.
7- Here you can select what additional options do you want to use and then click Next.
8- What additional tasks do you want to perform before and/or after a restore and then click Next.
9- If you want to type a name for the virtual machine types it in the Virtual machine name field. And configure schedule or select Run now and then click next.
10- Review the restore summary and click Finish.
11- In Job monitor option you can monitor the job.
12- After completed restore, you can see the virtual machine in vSphere client.
In this blog, I will explain how to create backup job in veritas backup exec v20.3, creates a job schedule full and incremental backup of a single server to a disk storage with a full backup.
Create Backup Job Veritas Backup Exec steps.
1- After adding the vCenter server we’d like to make a backup job. Select Backup and Restore Select Backup then select Backup to Disk.
2- Under vCenter Server properties, click Edit.
3- On the Backup Selections window select VMs which you want to backups and click ok.
4- Select Test/edit credentials for server > select test all and click ok.
5- Backup definition properties click the Edit button.
6- In the left pane and click Schedule and then select when you want the backup job or jobs to run.
7- Select Storage and then select the storage device that you want to use for the backup job or jobs.
8- Select this option to specify the network interface that Veritas Backup Exec users to access remote computers.
9- Each backup job and stage are often configured with different notification recipients. Veritas Backup Exec will notify people by email or text message.
In the left pane, select any additional options that you want to apply for the backup job or jobs. and then click the ok button to save the backup job Settings.
10- after configuring the backup option, so click on ok.
11- You can wait next backup schedule time or right click on the backup job and then click Run Now to start the backup job.
12- Click Yes to start the backup Job now.
13- Now the Veritas Backup Exec, Backup Job Running.
If you would like to know more about how to create a backup job. (Virtual Machine) in veritas backup exec then click here
