How to Install TrueNAS CORE Storage

install truenas core

In this guide, I am going to install TrueNAS CORE Storage in VMware Workstation. Insert the bootable media (USB or CD/DVD) and reboot or boot the system. Follow the procedure to boot into the BIOS of the motherboard by pressing the boot key.

TrueNAS CORE Hardware Requirements

How to Download TrueNAS CORE

How to create a bootable USB drive or CD/DVD Click here

Install TrueNAS CORE

1- After the system has booted into the installer, follow the below steps.
A boot screen like above should appear. Press Enter to select the Boot TrueNAS Installer.

truenas installer

2- TrueNAS console setup, select Install/Upgrade and then press Enter.

truenas install upgrade

3- Choose destination media to install the TrueNAS CORE and then press enter.

truenas destination media

4- TrueNAS installation, A warning will come up will erase all partitions and data, simply press yes.

truenas installation warning

5- Enter a root password for logging into the TrueNAS CORE from Web interface later and the press enter.

truenas installation root password

6- TrueNAS boot media, select Boot via BIOS option and then press enter.

truenas boot media

7- TrueNAS CORE installation is in progress.

truenas booting

8- TrueNAS CORE installation succeeded, Press enter.

truenas installation succeeded

9- Select Reboot System and press enter.

truenas console setup

10- TrueNAS CORE booting up.

truenas autoloading

Check your Ethernet cable is connected for internet and can be accessible to the Web interface.

TrueNAS CORE Configurations

Configure Network Interfaces

1- Type 1 to configure network interfaces and then press enter.

truenas core console setup

2- Select an interface, type 1 and press enter
Delete interface, type n and press enter
Type n and Press enter
Configure interface for DHCP, enter n and press enter
Configure IPv4, type y and press enter
IPv4 Address, NetMask, Configure IPv6, type n and then press enter

truenas console setup network

Configure DNS

3- Type 6 and hit enter.

truenas core console setup

4- Type DNS IP Address and press enter.

truenas console setup

TrueNAS Signin

Use any other PC using the same internet, open web browser type the TrueNAS IP address and press enter.

The username is root and the password is the one set during installation and select login

truenas core login

Now you can see TrueNAS CORE dashboard.

truenas core dashboard

Related: How to Configure iSCSI Share in Truenas CORE.

Comments

Leave a Reply